Buyers Should Be aware to Check and Confirm Spec below Even if we listed your vehicle as compatible:
【1】Bolt Pattern: 6x5.5 Inch (6x139.7mm)
【2】Wheel Studs: 12x1.5 threads, Shorter than 1.5" (38mm)
【3】There is enough space between fender and tires.
【4】Center bore compatible with: 4.25 Inch(108mm)
Vehicle Application:
For TOYOTA
1989-1995 4Runner (N120, N130)
1996-2020 4Runner (N180)
2001-2020 Toyota Tacoma, 6 Lug
2006-2014 FJ Cruiser, 6 Lug
2001-2007 Sequoia I
2000-2006 Tundra I
1995-2011 HiAce
1989-2016 HiLux 4WD (N80, N90- N160, N170)
Land Cruiser (J60, J70 -J120, J150)
For ISUZU
2002-2016 D-Max
1988-2002 Pickup
1981-2002 Trooper
For Mazda
1985-2006 B-series 2WD & 4x4
2006-2016 BT-50 2WD & 4x4
1983-2016 E2000/E2200
For MITSUBISHI
1996-2017 L200 4x4 / Pickup
1991-2017 Pajero Sport/Shogun
2004-2012 for Chevy Colorado/GMC Canyon, Gen 1
2006-2010 For HUMMER H3
2008-2016 for Hyundai H-1/Starex/Terracan
2007-2014 for KIA Carnival/Sedona
1998-2017 for Ford Ranger, 6 bolt
2003-2009 for LEXUS GX 470 /GX 460
2001-2006 for SSANGYONG Rexton, Gen 1
*Spacers will also apply on more vehicles, kindly verify using spacer specs.
*Installation surface of the hub and spacer must be perfectly aligned and close fit.
*It's Required and Necessary to Re-Torque the Spacers after the first 50-100 miles of driving, to prevent the nut from backing off due to the thermal stresses.
*Professional installation was highly recommended.
*Tools may needed if DIY:
⅜” torque wrench (at least 100 ft-lbs)
⅜” mechanic’s socket set
Tire iron OR ½” ratchet and socket set
Low-profile floor jack and jack stands etc.
From $30
Online 24 hours
365 a day
Secure payment